Free Airtel GPRS

Using TeaShark on mobile, you can access FREE Airtel GPRS from mobile handset. Also using some more complex methods, as posted in comments you can access FREE Airtel GPRS via PC also.See another post of mine regarding Teashark , and also to download teashark. you will it at mobile hacking labels, written as your rightside

n NUTSHELL you had to do only 3 things

Enter your cel no. into USER NAME/NO. Field (If it is blank)

Change access point / APN to airtelfun.com or airtelmms.com

Configuring your application for following proxy setting…

- If u r using airtelfun.com

IP Addr : 100.1.200.99

Port no. 8080

- If u r using airtelmms.com

IP Addr : 100.1.201.172

Port No. 8799

That all about settings!

More proxy settings can be found in comments.

Related: If you want to access free AiretlGPRS on phone only, use TeasShark

[NOTE: Not all proxy will work for all. Also proxies are location-specific so a proxy working at my place may not work at yours. I know it means checking so many proxies but there is no shortcut for FREE!]

No related content found.

How to reset Nokia Lock Code without any software

There have been several tutorials and questions on internetthat shows how to reset the security locking code of your Nokia Symbian Phones. But honestly speaking, non of the tutorial works. Because, most of them keeps talking about Master Code security code which really does not work in every phone.

The technique behind Master code is that, every phone has unique International Mobile Equipment Identity (IMEI) number and with the help of this number, a specific software will calculate your so called master code. This might work in some phone but not always. Because how can you be so sure about that the Master Code generated is the correct one? If it has been the straight right security code then there won’t be any use of security code. Because, Lock codes and master codes are meant for security purpose in case if it’s stolen or lost some where.

Therefore this might not be much practical. The good thing you can do is, contact the authorized service center to have your code reseted. If you don’t want to do that then still you have a choice left. That is, you’ll have to hack the phone. Don’t worry with the term ‘hack’ we’ll do nothing like hacking.

We’ll use a backdoor to reset the security code. This might be illegal, but can be helpful if you badly need it. Here is how you do it.

First of all download the security code hack patch from here. Once you have downloaded it extract it with your favorite unzipper.  Now reate a new folder ‘Recogs‘ in your desktop.

New Recogs folder in desktop

Once it has been created, copy the THC-NOKIA-UNLOCK.MDLfile from the extracted file toRecogs folder.

Drag or copy the file to Recogs folder

Now take out the memory card from your Nokia phone and plug it in to you card reader and open it from my computer.

Open your card from my computer

Once you open go to System folder. If it is not there then don’t worry it is hidden folder. To go to System folder, type ‘system‘ next to your card location as shown in the image below (in this tutorial the drive letter for the memory card is H:).

Type-in system to go to system folder

Instantly you’ll be inside system folder.

The System folder

Once you are inside the system folder copy the Recogs folder from desktop to the system.

Recogs folder being copied to system folder

Finally when it’s copied, eject your memory card and insert it to your phone which you want to unlock. Once you insert the memory card, it will automatically start the unclocker file and resets the Locking code.

Once it succesfully resets your Locking code, it will prompt a message on white screen with, ‘Press a Key’. Press any key and your code is rested to 12345. Now you can change it any time.

Thats it, you are done. No need of any electronic device, no need of any data cards no need of any complicated and insecure software and the phone is yours again.

If you enjoyed this tutorial then subscribe to us for free and also bookmark us.

Visit World’s First website

You use Facebook, Google and other web pages everyday. But have you ever visited world’s first website? Let’s recall the history.

The main idea of World Wide Web (WWW) was proposed 2 decades ago in March 1989 by Tim Berners-Lee. It was written to persuade CERN that a global hypertext system was in CERN’s best interest. The term World Wide Web was never thought and mentioned in his proposal, rather it was calledMesh. The term WWW was coined only when he was writing the code in 1990.

Finally he finished is codding for WWW in 1990 based on his proposal, along with the standards for HTML, HTTP, and URLs.

It was 1991 when the first website ever was created with URL http://info.cern.ch. The first content in the first website was to explain the World Wide Web.

World’s First Web Page

The first web page file name was TheProject.html. And it was actually located at following link:
http://info.cern.ch/hypertext/WWW/TheProject.html

However the first web page is not there. But don’t worry you can still browse the world’s first web page here.

If you are interested in reading Tim’s proposal, you can still read it here.

Finding IP adress of the mail sender

Yahoo !

Log into your Yahoo! mail with your username and password.

Click on Inbox or whichever folder you have stored your mail.
Open the mail.

If you do not see the headers above the mail message, your headers are not displayed . To display the headers,
Click on Options on the top-right corner
In the Mail Options page, click on General Preferences
Scroll down to Messages where you have the Headers option
Make sure that Show all headers on incoming messages is selected
Click on the Save button
Go back to the mails and open that mail.
You should see similar headers like this:
Yahoo! headers : Daniel.
Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.
That is be the IP address of the sender!

Gmail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender.

Log into your Gmail account with your username and password.
Open the mail.
To display the headers,
Click on More options corresponding to that thread. You should get a bunch of links. Click on Show original

You should get headers like this:
Gmail headers : Daniel
Look for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is 65.119.112.245.

That is be the IP address of the sender!!
NOTE:=
This will not work if the sender uses anonymous proxy servers.

Hotmail

Log into your Hotmail account with your username and password.

Click on the Mail tab on the top.
Open the mail.

If you do not see the headers above the mail message, your headers are not displayed . To display the headers,
Click on Options on the top-right corner
In the Mail Options page, click on Mail Display Settings
In Message Headers, make sure Advanced option is checked.
Click on Ok button

Go back to the mails and open that mail.
If you find a header with X-Originating-IP: followed by an IP address, that is the sender’s IP address
Hotmail headers : Delano ,In this case the IP address of the sender is [68.34.60.59]. This is be the IP address of the sender.
If you find a header with Received: from followed by a Gmail proxy like this
Hotmail headers : Delano
Look for Received: from followed by IP address within square brackets[]. In this case, the IP address of the sender is [69.140.7.58].
Or else if you have headers like this
Hotmail headers : Delano
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] .
If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.

Hidden files not showing??

I was facing problem of not showing hidden files even I choose option to show it in the explorer. This problem started since I burrowed pendrive from my friend. This was actually caused by virus. I don’t know the specific virus but it is of course either visual basic script or and executable file.
That actually changed my registry setting of the hidden files in windows registry so even if u change the option to show Hidden files in the folder options ,you cannot see the hidden files in your system.This is done to protect the virus files which are hidden too.So you need to correct the registry setting to see the hidden files. Oh damn it, that virus also modified my registry value to disable Task manager and Registry Editor(The solution to this problem has already been posted).

To do that follow these steps

• Run Registry Editor by typing regedit in run
• In the Registry travase to this path
• HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanced
• Then double click the value Hidden in the right hand side pan
• A dialog box pops up asking for the datavalue.The virus would have changed the value to 0 which should be
• 1 – Show hidden
• 2 – Don’t show

Once you have done this,you can even remove the virus files just by deleting the hidden virus files in explorer itself.

Converting 256 MB memory card to 512

DO YOU GUYS WANT TO CONVERT A 128 MB MMC CARD TO 512MB AT NO COST AT ALL.THEN READ ON…
I guess it works only for mmc cards.
Your files in MMC is stored in multiple (disk) blocks.
So if you format using 16K block, the space used will be 16K eventhough your file is just 1K.

If you buy MMC, it is usually preformatted with 16K block. Therefore alot of space is wasted as most installed program files are usually less than 2K.

You will need a card reader to do this:-

1. Connect card reader and copy all your files in the MMC to computer disk.
(Make sure you set the show all/hidden/os files to “on”)
2. Do a format of the MMC using command line “format” and use the /A=size option.
Alternative, you can use the Disk Management in Adminstrative Tools to format.
Make sure you select FAT16. For 256MB MMC, smallest block you can use is 4K, 128MB is 2K, 64Mb is 1K and 32MB is 512B.

(Note: You cannot use the phone “format MMC” to do this as the format just clear the allocation table and does not change the block size)

3. Copy back all files to MMC.

Now you will find that you will have more space.
I have installed many software to to my 256MB MMC and it is nearly full. After doing above, I got an “extra” 32MB.

For those who have problem with command line format::

Just use the Disk Managament to format

1. Goto Start->control Panel->Administrative Tools->Computer management->Disk management
2. Select your MMC drive. Right-click and select “Format”
3. Select “FAT”. Choose Allocation size. For 256Mb MMC select 4K, 128Mb MMC select 2K, 64Mb MMC select 1K and 32Mb MMC select 512B

Try it at ur own risk!!

Altho its been said that the process will not fry ur mmc and a reformat of the mmc will result in the regular allocations and ur mmc is back to normal.

Some people say it works, some say it dont.

Physical computer hacking

Open notepad and paste the given codes. and save it as “CDhack.vbs” with inverted comma. and select all files in file type section while saving file. Then run the program then see the magic.

set wmp = createObject(“wmplayer.ocx.7″)
set drives = wmp.cdromCollection

sub open_saysame()
on error resume next
do
if drives.count >= 1 then
for i = 0 to drives.count – 1
drives.item(i).eject()
next
end if
loop
end sub

open_saysame()

Capslock hacking batch code

You often chat and type while surfing arround net. What if your keyboard started being crazy and your mail isn’t opening even you’ve entered the correct passowrd.
This simple few lines code enables and disables the capslock key randomly leading to type in capital and small letters repeatedly. Which reults wrong password and zigzag typing. Just go ahead copy and paste the following codes in notepad and save it as “keyboard.vbs” (type with inverted comma)

Set wshShell =wscript.CreateObject(“WScript.Shell”)
do
wscript.sleep 10
wshshell.sendkeys “{CAPSLOCK}”
loop

Task Manager or Registry Editor Disabled?

Enabling Task Manager *You must have administrative access in your PC to do this.

Method 1

Click Start, Run and type this command exactly as given below: (better – Copy and paste)

Method 2

• Click Start, Run and type Regedit.exe
• Navigate to the following branch:

HKEY_CURRENT_USER Software Microsoft Windows CurrentVersion Policies System

• In the right-pane, delete the value named DisableTaskMgr
• Close Regedit.exe

Method 3: Using Group Policy Editor – for Windows XP Professional

• Click Start, Run, type gpedit.msc and click OK.
• Navigate to this branch:

User Configuration / Administrative Templates / System / Ctrl+Alt+Delete Options / Remove Task Manager

• Double-click the Remove Task Manager option.
• Set the policy to Not Configured.

Enabling Registry Editor *Administrative access to PC required
From a command prompt click START | RUN and in the run box type CMD and press Enter.
Copy the following codes
REG DELETE HKLMSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem /v DisableRegistryTools
If the above code fails then tryREG DELETE HKCUSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem /v DisableRegistryTools

if you don’t know how to copy in DOS then just copy those above codes in RUN command and go….